The Badger Unleashed is a fearless shooting companion like its predecessor, but this time with a battery-powered 250Ws strobe and HSS/TTL capabilities for the ultimate on-the-go flash head!
The Badger Unleashed 2-Light Softbox Kit with Backpack combines two Badger Unleashed flash heads complete with batteries, chargers, and protective caps, and two 61cm (24″) pop-up softboxes into our heavy-duty lighting backpack. This compact, lightweight and portable flash setup is designed to give photographers an easy-to-setup multi-point lighting solution wherever their work takes them. Simply add an Interfit TTL or Manual remote, your favourite light stands (we recommend the LS201 - 2.6m Premium Light Stand, and you’re ready to go!
The backpack features:
Building off the success of the Honey Badger 320w Flash, the Badger Unleashed shredded the restraints of an AC power cable and now roams free thanks to a drop-in Lithium-Ion battery. Add in High-Speed Sync and TTL capabilities, and the Badger Unleashed becomes a fearless shooting companion and the ultimate on-the-go flash head!
The Badger Unleashed is a direct response to customer requests for a light with the compact form factor of the Honey Badger and the mobility and high-tech functionality of the S1. We packed 250Ws of power, a 15W LED modelling lamp, and an in-line battery into a small body and included HSS and TTL in addition to a new stroboscopic mode (coming Spring 2019) for the most versatile Badger yet! This all comes in the bold yellow colour you know, but with new design changes for an unmistakably Interfit experience.
Built-In Battery Power:
The namesake feature of the Badger Unleashed is an entirely DC powered system, offering full portability in a compact body with 250Ws of light in up to 430 full-power flashes. Out of juice? The Badger Unleashed can recharge its battery to full in just 90 minutes, and extra battery packs can be swapped mid-shoot (HBU250B), so you’ll never miss that golden hour at the end of your shoot again!
Compact Form Factor:
The ability to travel with lighting is crucial for a mobile photographer, and size and weight matter. The Badger Unleashed weighs less than 1.8kg, measures 12.7cm wide (15cm including the outer ring), and 17.8cm deep from the back panel to the edge of the protective cap, making it one of the most compact self-contained studio flash heads on the market. The robust and compact housing paired with its on-board battery power make the Badger Unleashed the ideal solution for photographers on the move.
Extended Power Range:
The Badger Unleashed has an incredible 9-stop power range, two more stops than our Honey Badger sister strobe, and four more than traditional studio flash heads. Power can be adjusted from 250Ws down to 1Ws in 1/10th of a stop increments for precise exposure.
Best-In-Class Recycle Time:
At full power, the Badger Unleashed recycles in an impressive 1.5 seconds at full power. Plus, recycle times only get shorter and shorter as you decrease the flash power!
High Speed Sync & Through-The-Lens Metering Modes:
Short flash durations give us the ability to freeze motion beyond the capabilities of our shutter sync speed. In HSS mode, the Badger Unleashed has a t.1 flash duration of 1/8000th of a second. With TTL metering, the new Badger is even capable of automatically adjusting flash power for you with +/- 3 stops of exposure compensation as the lighting around your subject changes from shot to shot – simply keep shooting with your viewfinder and the Badger Unleashed takes care of the rest!
15W LED Modelling Lamp:
The Badger Unleashed is equipped with a 15W LED modelling lamp that produces 1250 Lumens. This flicker-free LED can be used as a continuous light source for both photo and video purposes. The modelling lamp can be set to adjust proportionately to the flash power, or to full power. For the most accurate light tone portrayal, we balanced the colour temperature to 5500K – giving you nice daylight balanced colour tones in every scene.
Built-in Radio Receiver:
The Badger Unleashed features a built-in radio receiver that is compatible with all Interfit TTL and manual remotes. This allows full control over the light’s power range, flash mode, modelling lamp, and beep function. When using the Interfit manual remote, the Badger Unleashed can be adjusted individually via 8 different control groups (A-H), across 15 different channels (1-15). This allows for intricate multi-light setups and negates interference from neighbouring photographers.
Versatile Modifier Mount:
The most unique feature of the Badger Unleashed is the versatile modifier mount. The Badger Unleashed utilizes the popular Bowens® S-Type modifier mount, making it compatible with all of the same modifiers as the S1, Honey Badger, and any other Interfit or S-Type mount light system. In addition, the Badger Unleashed features the built-in pop-up softbox ring made popular by the original Honey Badger for use with pop-up style softboxes that are popular with speedlight shooters. The idea behind this feature is to allow photographers to grow into their studio lights by allowing them to use some of the existing modifiers they may already have purchased for speedlights.
Glass Dome Diffuser:
The Badger Unleashed includes a frosted glass dome diffuser. This protects the flash tube and helps to spread light evenly throughout the modifier.
|Colour Temperature:||5500 ±100K|
|Power Range:||9 Stops (250Ws – 1Ws)|
|Recycle Time:||1.5 seconds at full power|
|Multi (Stroboscopic) Mode:||Up to 90 flashes at 99Hz *Multi-Mode is only compatible with Interfit Version 2 TTL Remotes, coming Spring 2019|
|LED Modelling Lamp:||15W, 1250Lm, 5500K, 90+ CRI|
|Triggering:||Sync Port IR/Optical Cell Interfit Manual Remote Interfit TTL Remotes|
|Shooting Modes:||Manual, TTL, HSS|
|Flash Exposure Compensation:||+/- 3 stops|
|Max Sync Speed:||1/250 sec. in normal sync mode 1/8000 sec. in HSS mode|
|Battery Type:||14.8V, 2900mAh lithium-ion cell|
|Battery Life:||430 full-power flashes|
|Channels:||15* (1-15) *Limited to channels 1-8 when using Interfit Gen. 1 TTL Remotes|
|Groups:||5* (A, B, C, D, E) *Groups D and E will be unlocked with Interfit Gen. 2 TTL Remotes (Spring 2019)|
|Head Dimensions:||5” × 6” × 7” (12.7 × 15 × 17.8cm)|
Please ensure that you are on the same channel (this will be the number eg. 1a) on both the light and the trigger, as well as ensuring both the light and the trigger are up to date with your camera model. You can find firmware here.
Please ensure your camera hot shoe settings are correct, please refer to your camera user manual.
If you think you have updated your firmware and it doesn’t suit your older camera type, please contact us for backdated firmware files – you must have a Dropbox/Google drive account to enable us to send them.
Simply set up the lights on the same channel, then set the group to a different setting, from here you can control individual lights. For example, one [light] can be on 1A at 4.5 and another [light] can be on 1B at 5.0 – as long as they are on the same channel they will fire at the same time with different settings.
Please see this video on how to change the flash tube.
Yes! All our Interfit flash range will have optical sync which will enable your flash to be triggered by another light source, simply set the mode to CELL and your [HB320/HBU250/INTS1/INTS1A] will be fired by another light. Cell mode works on the speed of light, for best results use a direct line. Please note, on this mode you cannot control HSS or TTL.
With the sync cable that comes with the [HB320/HBU250/INTS1/INTS1A] plug it directly into the PC Sync Socket on your camera. Entry-level cameras do not have these, but you can buy an adapter. Like cell mode, you will not be able to control HSS or TTL using this method to fire the lights.
Check that the hotshoe settings on your camera are set up correctly, refer to your camera’s user manual.
Please also make sure all contact points on both the camera and trigger are clean and are not damaged.
We cannot guarantee any third-party equipment will work with our Interfit lights as they would not have been tested. If they do work, it is not guaranteed that you will be able to control HSS and TTL functions with them.
Yes, but like with any socket do not overload the extension lead and make sure it is a properly rated, surge protected extension lead.
Yes you can use your [HB320/HBU250/INTS1/INTS1A/Monolight/F121] in Europe.
Please ensure that both the light and the trigger are up to date with your camera model. You can find firmware here. You could be over firing the flash, the higher the setting of the light intensity, the longer the flash tube will take to recharge.
Please ensure that both the light and the trigger are up to date with your camera model. You can find firmware here. Your flash tube may have reached the end of its lifespan, you may need to purchase a replacement. Please also ensure that the flash tube is installed correctly - see this video on how to change the flash tube.
When charging the battery for the HBU250 please make sure the charging cable is inserted and light on the transformer has turned RED. When charging is complete the light on the charger will turn GREEN. NOTE: If the battery charger has not been inserted correctly or the battery is not connected the light on the transformer will remain GREEN
FREE UK Mainland Delivery in a single order
Otherwise, it's typically £5.99 per order
Delivery should be expected between 2-3 working days unless stated on the product page.
For more information on our deliveries please click here.
Please be aware that due to the Corona Virus that delivery services are operating a 1 attempt delivery only, If you miss your delivery then it will be sent back to us, this is out of our control, unfortunately. You will have to re-order or contact us to rearrange delivery.
Approximately 4-10 working days depending on country
via Parcelforce Signed Delivery (fully traceable service). Please add items to the basket to calculate delivery for the desired country. This is not guaranteed delivery service due to COVID-19 and we advise caution when ordering.
All our consignments irrespective of the carrier require a signature upon delivery. Small packages that can fit through a letterbox do not need to be signed for. Deliveries are typically made between 08:00 and 18:00 so please bare this in mind when choosing a delivery address.
We do try when possible to reuse packaging from our own suppliers in order to send purchased items to our customers. We ask if the packaging is still in good condition after you've received your goods then please try to use it again or recycle if not possible.
Returns & Exchanges
While we hope that you will love every purchase, if you are not completely satisfied with your goods we will happily offer you a full refund or free exchange.
You are entitled to a refund or an exchange if you contact Interfit Photographic within 14 days of receipt to acknowledge the return.
You then need to return your item(s) within a further 14 days in a perfect, resalable condition with original box, all labels and tags attached.
All returns (unless the product/s are either faulty or damaged) postage costs are the responsibility of the customer and are not refundable. If the goods are faulty or damaged, we will provide pre-paid postage.
You can return your items in the post. We recommend a tracked delivery as you are responsible for the item until it arrives back.
Please contact email@example.com with your return tracking number. We are then aware you have returned your order, and this will avoid any delays in processing your request.
*Please note: Flashbulbs and flash tubes are non-returnable.
For more information on our returns policy click here.
Making a Purchase
To purchase the items in your basket and proceed with your order using our secure online purchasing facility, click on the "Checkout" button on the shopping basket screen. You will then be given the option to enter your email address and password if you are an existing user of the site, or you can choose to pay directly. You will then be transferred to our secure server provider Sagepay or PayPal to complete your order.
You will be asked to provide certain information we need to enable us to process your order such as your preferred delivery address and payment details. It is your responsibility to provide us with sufficient information to process your order.
We will acknowledge receipt of your order by email. This is not our acceptance of your order, but confirmation that it has been received.
We accept all major credit and debit cards