The S1 Manual Remote is a universal remote that has been optimized for use with the S1, S1a, and Honey Badger strobes. The single-pin design allows for manual control and firing across all camera platforms.
This remote is compatible with all makes and models of cameras* (film and digital) in manual mode.
*Access to TTL and HSS functions of S1 and S1a require the dedicated TTL remotes, Sony models require a multi interface shoe adaptor *Not Included*
Remote Power Adjustment:
The S1 Manual Remote allows you to control the power output of your S1, S1, or Honey Badger from the camera position.
8 Control Groups:
This feature allows you to control up to 8 groups of lights independently of one another. Groups are displayed by letters, A-H.
*S1 and S1a can only be placed on Groups A, B, or C. Honey Badger can be placed on all Groups.
Having 15 Channels allows you to work in proximity with other photographers without interfering with each other’s light setups. Channels are displayed by numbers 1-15.
*S1 and S1a can only be placed Channels 1-8. Honey Badger can be placed all Channels.
In addition to triggering and manual control, the Interfit S1 Manual remote allows you to control the modelling lamps and audible beeps on your lights.
100m Wireless Range:
The 100m (320’) wireless range lets you roam freely around the studio, field, city block, or wherever your work takes you!
All S1 remotes are powered by two AAA batteries.
3.5mm Sync Jack:
The 3.5mm sync jack on the side of the remote allows you to use your S1, S1a, or Honey Badger lights in conjunction with other radio flash systems. Simply connect your 3rd-party remote to the S1 remote via sync cable to fire all lights together.
AC Power Option:
The S1 Manual Remote can be powered by AC power using the micro-USB port on the side of the remote, eliminating the need for replacement batteries and disabling the remote’s auto-shut-off functions. This is especially useful for long-term or permanent camera fixtures.
1 x Manual Remote
1 x Micro-USB Cable
|Camera Compatibility||All camera models* Sony models require a multi interface shoe adaptor *Not Included*|
|Flash Compatibility||Interfit S1, S1a, Honey Badger|
|Max Sync Speed||1/250|
|Control Groups||8 (A-H) *S1/S1a compatible with groups A,B,C only|
|Channels||15 (1-15) *S1/S1a compatible with channels 1-8 only|
|Battery Type||2 – AAA Batteries|
|In The Box||1 x Manual Remote, 1 x Micro-USB Cable|
Check that the hotshoe settings on your camera are set up correctly, refer to your camera’s user manual.
Please also make sure all contact points on both the camera and trigger are clean and are not damaged.
We cannot guarantee any third-party equipment will work with our Interfit lights as they would not have been tested. If they do work, it is not guaranteed that you will be able to control HSS and TTL functions with them.
FREE UK Mainland Delivery in a single order
Otherwise, it's typically £5.99 per order
Delivery should be expected between 2-3 working days unless stated on the product page.
For more information on our deliveries please click here.
Please be aware that due to the Corona Virus that delivery services are operating a 1 attempt delivery only, If you miss your delivery then it will be sent back to us, this is out of our control, unfortunately. You will have to re-order or contact us to rearrange delivery.
Approximately 4-10 working days depending on country
via Parcelforce Signed Delivery (fully traceable service). Please add items to the basket to calculate delivery for the desired country. This is not guaranteed delivery service due to COVID-19 and we advise caution when ordering.
All our consignments irrespective of the carrier require a signature upon delivery. Small packages that can fit through a letterbox do not need to be signed for. Deliveries are typically made between 08:00 and 18:00 so please bare this in mind when choosing a delivery address.
We do try when possible to reuse packaging from our own suppliers in order to send purchased items to our customers. We ask if the packaging is still in good condition after you've received your goods then please try to use it again or recycle if not possible.
Returns & Exchanges
While we hope that you will love every purchase, if you are not completely satisfied with your goods we will happily offer you a full refund or free exchange.
You are entitled to a refund or an exchange if you contact Interfit Photographic within 14 days of receipt to acknowledge the return.
You then need to return your item(s) within a further 14 days in a perfect, resalable condition with original box, all labels and tags attached.
All returns (unless the product/s are either faulty or damaged) postage costs are the responsibility of the customer and are not refundable. If the goods are faulty or damaged, we will provide pre-paid postage.
You can return your items in the post. We recommend a tracked delivery as you are responsible for the item until it arrives back.
Please contact email@example.com with your return tracking number. We are then aware you have returned your order, and this will avoid any delays in processing your request.
*Please note: Flashbulbs and flash tubes are non-returnable.
For more information on our returns policy click here.
Making a Purchase
To purchase the items in your basket and proceed with your order using our secure online purchasing facility, click on the "Checkout" button on the shopping basket screen. You will then be given the option to enter your email address and password if you are an existing user of the site, or you can choose to pay directly. You will then be transferred to our secure server provider Sagepay or PayPal to complete your order.
You will be asked to provide certain information we need to enable us to process your order such as your preferred delivery address and payment details. It is your responsibility to provide us with sufficient information to process your order.
We will acknowledge receipt of your order by email. This is not our acceptance of your order, but confirmation that it has been received.
We accept all major credit and debit cards