The Badger Unleashed is a fearless shooting companion like its predecessor, but this time with a battery-powered 250Ws strobe and HSS/TTL capabilities for the ultimate on-the-go flash head!
Building off the success of the Honey Badger, the Badger Unleashed shredded the restraints of an AC power cable and now roams free thanks to a drop-in Lithium-Ion battery. Add in High-Speed Sync and TTL capabilities, and the Badger Unleashed becomes a fearless shooting companion and the ultimate on-the-go flash head!
The Badger Unleashed is a direct response to customer requests for a light with the compact form factor of the Honey Badger and the mobility and high-tech functionality of the S1. We packed 250Ws of power, a 15W LED modelling lamp, and an in-line battery into a small body. Included HSS and TTL for the most versatile Badger yet! This all comes in the bold yellow colour you know, but with new design changes for an unmistakably Interfit experience.
Built-In Battery Power:
The namesake feature of the Badger Unleashed is an entirely DC powered system, offering full portability in a compact body with 250Ws of light in up to 430 full-power flashes. Out of juice? The Badger Unleashed can recharge its battery to full in just 90 minutes, and extra battery packs can be swapped mid-shoot, so you’ll never miss that golden hour at the end of your shoot again!
Deep Zoom Reflector:
The Interfit 45˚ Deep Zoom Reflector doubles the perceived brightness of your light source by columnizing the light into a tight, 45˚ beam angle. This feature makes the Deep Zoom Reflector a great modifier for sports arena photographers where you need to throw light over long distances, or for location work where additional brightness may be necessary to combat bright ambient light. This reflector pairs very well with the Interfit Badger unleashed in HSS.
The Interfit 45˚ Deep Zoom Reflector creates a very even throw of light with very limited light fall-off and a defined edge. Using the optional honeycomb grids will allow you to restrict the beam angle even further, creating precise and dramatic light.
Standard 18cm Reflector:
The Interfit Standard 18CM (7”) Reflector is a versatile and easy-to-use light modifier. When used by itself, a 18cm (7”) reflector creates a concentrated and crisp light and can be focused into tighter beams using the optional honeycomb grids.
60cm x 60cm Pop up softbox:
Interfit’s range of Pop-Up Softboxes are an easy-to-use solution perfect for studio or location shooting. No need for complicated assembly, simply folds open and closes within seconds! This range of softboxes are ideal for portrait and product photography and location shoots including wedding photography.
This high-quality backpack was designed to hold two complete Interfit S1 flash heads and all the accessories that are included. There is room inside for two 500Ws flash heads with reflectors, and much more! Padded dividers allow you to customize the layout of this bag to fit your needs. Whether you need to carry a complete lighting kit, or your camera gear and a gang of speedlights, this backpack will be ready for you.
The backpack is designed to meet the needs of working photographers. Rugged construction for everyday use, padded straps and hip belt for added comfort and plenty of additional space for accessories gives photographers the ability to round out this kit to suit their own unique shooting style.
The backpack features:
*This backpack will fit in the overhead storage compartment of most commercial airlines.
The TTL-S Remote for Sony gives users complete wireless control of their Interfit premium monolights from the camera position.
**NOTE: Your lights and remotes may need a firmware update to ensure complete compatibility. Check for latest firmware!
|Compatibility||Interfit S1 and S1a|
|Groups||3 (A, B, C)|
|Maximum Flash Sync Speed||1/250sec. in normal sync mode, 1/8000sec. in high speed sync mode|
|Transmission Range||100m (320')|
|Power Supply||2 – AAA Batteries (not included)|
|Dimensions||8 x 6 x 6cm (3 x 2.5 x 2.5″)|
|In The Box||1 x Interfit S1 TTL-S Remote for Sony|
|Colour Temperature:||5500 ±100K|
|Power Range:||9-Stops (250Ws – 1Ws)|
|Recycle Time:||1.5 Seconds|
|Multi (Stroboscopic) Mode:||Up to 90 flashes at 99Hz *Multi-Mode is only compatible with Interfit Version 2 TTL Remotes, coming Spring 2019|
|LED Modelling Lamp:||15W, 1250Lm, 5500K, 90+ CRI|
|Triggering:||Sync Port IR/Optical Cell Interfit Manual Remote Interfit TTL Remotes|
|Shooting Modes:||Manual, TTL, HSS|
|Flash Exposure Compensation:||+/- 3 stops|
|Max Sync Speed:||1/250 sec. in normal sync mode 1/8000 sec. in HSS mode|
|Battery Type:||14.8V, 2900mAh lithium-ion cell|
|Battery Life:||430 full-power flashes|
|Channels:||15* (1-15) *Limited to channels 1-8 when using Interfit Gen. 1 TTL Remotes|
|Groups:||5* (A, B, C, D, E) *Groups D and E will be unlocked with Interfit Gen. 2 TTL Remotes (Spring 2019)|
|Head Dimensions:||5” × 6” × 7” (12.7 × 15 × 17.8cm)|
|In The Box||1x Badger Unleashed 250Ws Flash Head, 1x Badger Unleashed 2900mAh Battery Pack, 1x Battery Charging Cable, 1x Quick Start Guide|
|Fitting Type||Pop-Up Softbox Ring|
|Softbox||60cm (24") Pop-up|
|Accepts Honeycomb Grid||No|
|Construction||Aluminum reinforced polycarbonate|
|In The Box||1 x Interfit 60x60cm Pop Up Softbox, 1 x Inner Diffuser, 1 x Outer Diffuser, 1 x Nylon Carry Bag|
|Internal Finish||Pebbled Silver|
|Beam Angle||45 Degrees|
|Light Gain||+ 1 Stop|
|Accepts Grids||Yes – Not Included|
|Dimensions||28 x 28 x 34cm (11.5″ x 11.5″ x 13.5″)|
|In The Box||1 x 45 Degrees Deep Zoom Reflector|
|Internal Finish||Pebbled Silver|
|Accepts Grids||Yes – Not Included|
|In The Box||1 x Interfit Standard 18cm (7″) Reflector|
|Construction||1000D Cordura Nylon and Neoprene|
|Internal Dimensions||Main compartment – 53.3x35.5 x20.3cm (21″ x 14″ x 8″) (LxWxH) Additional storage compartments allow for even greater storage capacity|
|External Dimensions||58.4x43x30.5cm (23″ x 17″ x 12″) (LxWxH)|
|In The Box||1 x Interfit Twin-Head Lighting Backpack|
Please ensure that you are on the same channel (this will be the number eg. 1a) on both the light and the trigger, as well as ensuring both the light and the trigger are up to date with your camera model. You can find firmware here.
Please ensure your camera hot shoe settings are correct, please refer to your camera user manual.
If you think you have updated your firmware and it doesn’t suit your older camera type, please contact us for backdated firmware files – you must have a Dropbox/Google drive account to enable us to send them.
Simply set up the lights on the same channel, then set the group to a different setting, from here you can control individual lights. For example, one [light] can be on 1A at 4.5 and another [light] can be on 1B at 5.0 – as long as they are on the same channel they will fire at the same time with different settings.
Please see this video on how to change the flash tube.
Yes! All our Interfit flash range will have optical sync which will enable your flash to be triggered by another light source, simply set the mode to CELL and your [HB320/HBU250/INTS1/INTS1A] will be fired by another light. Cell mode works on the speed of light, for best results use a direct line. Please note, on this mode you cannot control HSS or TTL.
With the sync cable that comes with the [HB320/HBU250/INTS1/INTS1A] plug it directly into the PC Sync Socket on your camera. Entry-level cameras do not have these, but you can buy an adapter. Like cell mode, you will not be able to control HSS or TTL using this method to fire the lights.
Check that the hotshoe settings on your camera are set up correctly, refer to your camera’s user manual.
Please also make sure all contact points on both the camera and trigger are clean and are not damaged.
We cannot guarantee any third-party equipment will work with our Interfit lights as they would not have been tested. If they do work, it is not guaranteed that you will be able to control HSS and TTL functions with them.
Yes, but like with any socket do not overload the extension lead and make sure it is a properly rated, surge protected extension lead.
Yes you can use your [HB320/HBU250/INTS1/INTS1A/Monolight/F121] in Europe.
Please ensure that both the light and the trigger are up to date with your camera model. You can find firmware here. You could be over firing the flash, the higher the setting of the light intensity, the longer the flash tube will take to recharge.
Please ensure that both the light and the trigger are up to date with your camera model. You can find firmware here. Your flash tube may have reached the end of its lifespan, you may need to purchase a replacement. Please also ensure that the flash tube is installed correctly - see this video on how to change the flash tube.
When charging the battery for the HBU250 please make sure the charging cable is inserted and light on the transformer has turned RED. When charging is complete the light on the charger will turn GREEN. NOTE: If the battery charger has not been inserted correctly or the battery is not connected the light on the transformer will remain GREEN
Making a Purchase
To purchase the items in your basket and proceed with your order using our secure online purchasing facility, click on the "Checkout" button on the shopping basket screen. You will then be given the option to enter your email address and password if you are an existing user of the site, or you can choose to pay directly. You will then be transferred to our secure server provider Sagepay or PayPal to complete your order.
You will be asked to provide certain information we need to enable us to process your order such as your preferred delivery address and payment details. It is your responsibility to provide us with sufficient information to process your order.
We will acknowledge receipt of your order by email. This is not our acceptance of your order, but confirmation that it has been received.
We accept all major credit and debit cards