1 Year Guarantee*
"CAUTION: When installing the halogen modelling bulb make sure that you DO NOT touch the bulb with bare skin. Doing this can leave oil residue from fingertips on the bulb which can cause it to overheat and fail. Please use a clean piece of dry tissue, gloves or the plastic covering that is on the halogen modelling bulb when installing, remove the plastic covering when the bulb is installed."
|Power Range||6 Stops, stepless|
|Recycle Time Full Power||1-2 Seconds|
|Colour Temperature||5600K +/- 200K|
|Fitting Type||Bowens® / S-Type|
|Modelling Lamp||75W Halogen|
|Triggering||F121 Remote (Sold separately), Sync cable, Optical slave, Third-party flash trigger|
|Maximum Flash Sync Speed||1/125 with the trigger and 1/250 with the cable|
|Operating Voltage||220V 50Hz|
|Temperature Regulation||Thermal cut off at 75C|
|Auto Power Dump||Yes|
|Flash Ready Indicator||LED and switchable audible|
|Dimensions||33cm x 23cm x 12cm|
|In the Box||1x - F121 200w Flash Head, 1x - 18cm (7") Reflector - with Bowens® S-Mount, 1x - Power Cable, 1x - Sync Cable|
Please ensure you are on the correct channel on both the F121 and the F121 trigger. For example, channel 1 on the F121 and channel 1 on the F121 trigger.
Please see this video on how to change the flash tube.
Yes! All our Interfit flash range will have optical sync which will enable your flash to be triggered by another light source, simply set the mode to CELL and your [HB320/HBU250/INTS1/INTS1A] will be fired by another light. Cell mode works on the speed of light, for best results use a direct line. Please note, on this mode you cannot control HSS or TTL.
With the sync cable that comes with the [HB320/HBU250/INTS1/INTS1A] plug it directly into the PC Sync Socket on your camera. Entry-level cameras do not have these, but you can buy an adapter. Like cell mode, you will not be able to control HSS or TTL using this method to fire the lights.
Check that the hotshoe settings on your camera are set up correctly, refer to your camera’s user manual.
Please also make sure all contact points on both the camera and trigger are clean and are not damaged.
We cannot guarantee any third-party equipment will work with our Interfit lights as they would not have been tested. If they do work, it is not guaranteed that you will be able to control HSS and TTL functions with them.
Yes, but like with any socket do not overload the extension lead and make sure it is a properly rated, surge protected extension lead.
Yes you can use your [HB320/HBU250/INTS1/INTS1A/Monolight/F121] in Europe.
Please ensure that both the light and the trigger are up to date with your camera model. You can find firmware here. You could be over firing the flash, the higher the setting of the light intensity, the longer the flash tube will take to recharge.
You could be over firing the flash, the higher the setting of the light intensity, the longer the flash tube will take to recharge.
Your flash tube may have reached the end of its lifespan, you may need to purchase a replacement. Please also ensure that the flash tube is installed correctly - see this video on how to change the flash tube.
Making a Purchase
To purchase the items in your basket and proceed with your order using our secure online purchasing facility, click on the "Checkout" button on the shopping basket screen. You will then be given the option to enter your email address and password if you are an existing user of the site, or you can choose to pay directly. You will then be transferred to our secure server provider Sagepay or PayPal to complete your order.
You will be asked to provide certain information we need to enable us to process your order such as your preferred delivery address and payment details. It is your responsibility to provide us with sufficient information to process your order.
We will acknowledge receipt of your order by email. This is not our acceptance of your order, but confirmation that it has been received.
We accept all major credit and debit cards